Same as the DIY-kit, except you will get a built, calibrated and tested main board. You still need to solder the other boards and assemble the unit. If you want a considerably simpler and/or faster build, this is your option.
UV-printed 1.5mm stainless steel enclosure, pcb:s (voice, pot, buss, expansion) potentiometers 16mm (29), potentiometers 9mm (2), rotary switches (9), knobs (38), trimpots (11), jacks 3.5mm (43), jacks 6.3mm (2), power switch, dc jack, midi din jack, 50 pin IDC flat cable, long pin header 2×20 (2), short pin header 2×20 (1) CV-12 midi ic, green LED, 8x M3 screws with round head 2mm hex, 2x 30mm stand-off:s with 4xm3 screws.
Everything included to build, except external power supply. 9-18V DC, positive center, 500mA or more.
Build instructions available, no extra support included.
Boards are tested extensively before dispatch and numbered, but fine tune of calibration points might be needed after shipping. No returns of the main board – be careful, do not short circuit.