Archive for the ‘For Sale’ Category

New Items for sale

Quasimidi Cyber-6 and Soltron SM100

Casio CZ-5000

Casio FZ-1

Casio CZ-1000

Sequential Circuits Prophet 2000

Ensoniq ESQ1

Here’s some videos of some new items that we have for sale, click the for sale link above for prices.


03 2010

Roland TR-606 [SOLD] Korg Poly 800 [SOLD]

A couple more items we have for sale, this time a recently refurbished Roland TR-606 and a Korg Poly 800. Click here to go direct to the For Sale page.

Update: Everything sold!


02 2010

A few items for sale

In the near future we will open a web shop, but to get things rolling here’s a quick demonstration of a few items we are selling, you can find prices (along with some other pieces we have for sale) by following the “for sale” link at the top of this page.


02 2010

Yamaha CS70m Kenton Midi retrofit group buy

Finally a way to realize the potential of the mighty CS70m!

You now have the opportunity to get a Yamaha CS70m Midi retrofit by Kenton Electronics UK. It will be a redesign of the Kenton kit that was discontinued due to parts availability quite some years ago.

Scroll down to the end of the document to read the specifications.

This is a group buy, which means that we need at least 10 prepaid orders to start the production. Production and distribution will be approx 8 weeks.


349 UK pounds + VAT which needs to be paid in advance to Analog Sweden. If we don’t reach 10 prepaid orders by the 1st of  November 2009, your money will be promptly returned.  Shipping cost not included.

Ordering & Questions

Use the contact form here

November 1, 2009

The kits are not intended for installation by the end user. They should always be fitted by an experienced synth engineer. The kits are built and tested before dispatch. DIY-kit NOT available. Analog Sweden can do the installation.

We at Analog Sweden have had a few enquiries about CS70m retrofits, so we got in touch with Kenton to investigate the possibilites for a new production run. Kenton wanted to have a group order to start the production, and here we go.
Analog Sweden is a studio and repair workshop in Helsingborg, Sweden. You can see what we do at

If in doubt, you can verify our claims if you get in touch with Kenton.


This retrofit kit for the Yamaha CS-70M adds the following MIDI control:

For incoming MIDI:

Any MIDI channel can be selected

Notes on MIDI note numbers normally 36 – 96 but transpose possible

Program change numbers 1 – 32
where 1 – 16 = upper + manual, 17 – 32 = lower + manual

Pitchbend -

Mod Wheel -

Filter cutoff frequency (of low pass filter)




This kit is to receive MIDI only, no MIDI can be sent, however a Thru
socket is included.

MIDI In, & Thru sockets
Push button (for programming the MIDI setup)
Setups are stored in non-volatile memory (Eeprom)

The kit comprises the following items
Circuit board -
Small pack – contains DIN sockets and mounting hardware
Large pack – contains cable assemblies
User instructions – How to change from default settings and general
Fitting instructions – step by step fitting guide plus diagrams of where
to connect what.

All kits are fully checked and tested before despatch.

Note: The retrofit kits are not intended for installation by the end
user. They should always be fitted by an experienced synth engineer.

Errors & Omissions excepted



08 2009

Want the classic Neve sound without the price?



The classic sound of the Neve 1073 and the 1084 Mic preamps has been cloned by TNC Audio and takes the form of a 1U rack. The TNC Audio ACMP-73 and ACMP-84 come complete with integrated power supply, balanced line and Mic XLR inputs with phantom power and a balanced XLR output. We’re happy to announce that we have recently taken delivery of a modest quantity of these units and are offering them for sale here. While we are selling them as used and even offering a 3 months warranty against faults, they are actually as new, as all we have done is to open the packaging to test that they are working correctly.

What’s in the box?

ACMP-73 or ACMP-84 complete with integrated switchable transformer (110-230v).
User manual
Power cable (us plug)

395 euro inc vat, plus shipping.

We have 4 of each for sale, use the contact link at the top of the page if you are interested in one.

For more information about these units here’s a few links,

User comments
More user comments

Tags: , ,


08 2009

Roland MC-4B CV Sequencer For Sale – SOLD!


You’re probably looking at one of the finest specimen of a Roland MC-4B,  unless you bought one new and never opened the box.  It’s total museum quality – even the laminated fake wood sides are perfect, which I have never seen before. Also comes with the original manual, which also is in perfect condition, even the sticker which says “Halmen musik” – a local music store that still exists.  The original owner bought it here in Helsingborg, so it never left town.

It’s bascially a four channel CV sequencer with the tightest timing you’ll ever experience. Forget midi! But it’s in a much too nice condtion to be used with anything but gloves on the hands and a gentle touch.  It looks, feels and is the business

If you want to know more, there are some excellent resources here and here

Located in Helsingborg, Sweden

Price: 1000 euro or taking offers

SOLD – thanks for all the interest!

Tags: ,


06 2009

SOLD – Roland SIP-300 & SIP 301 preamps for sale



These beautiful babies need to go to make room for other gear.  Working order, of course, and cosmetically ok too.

The SIP-301 is a bass preamp with a DI, compressor and 3 band EQ, all mounted in a 2U unit which is rackable if you have the right rack mounts for it.  240 volt version for EU countries. More info here

The SIP-300 is a guitar preamp with a DI, overdrive/distortion and 3 band EQ, also mounted in a 2U unit which is rackable if you have the right rack mounts for it. 110 volt version with US plug. More info here

Price is 150 euro each, or both for 250 plus shipping alt. free pick-up (we’re too generous, I know)

SOLD – thanks for all the interest!

Located in Helsingborg, Sweden


06 2009